MakerBot 3D-PO: Difference between revisions
From Hive76 Wiki
Jump to navigationJump to search
No edit summary |
|||
Line 5: | Line 5: | ||
==== First time printers ==== | ==== First time printers ==== | ||
1) Download 007 version of ReplicatorG from : http://code.google.com/p/replicatorg/downloads/list | 1) Download 007 version of ReplicatorG from : http://code.google.com/p/replicatorg/downloads/list | ||
2) Unzip or unpack the package | |||
3) if you are on a mac and you haven't used a FTDI cable before (or don't know what one is) go into the ReplicatorG/Drivers folder, and install the right driver (Intel or PPC, be careful) for an FTDI cable (a USB cable that connects to embeded devices, like MakerBot). |
Revision as of 21:00, 4 September 2009
Our MakerBot is named 3D-PO and is a bog standard MakerBot 'Batch 5' Model. We print things.
Printing with 3D-PO
Each MakerBot is a bit difference, since they are hand assembled. This is a how to for our specific MakerBot
First time printers
1) Download 007 version of ReplicatorG from : http://code.google.com/p/replicatorg/downloads/list 2) Unzip or unpack the package 3) if you are on a mac and you haven't used a FTDI cable before (or don't know what one is) go into the ReplicatorG/Drivers folder, and install the right driver (Intel or PPC, be careful) for an FTDI cable (a USB cable that connects to embeded devices, like MakerBot).