SAM9-L9260 Hacking

A couple of SAM9 Boards are around the space (see http://www.olimex.com/dev/sam9-L9260.html for spec's).

Bootloader:

Mac:

1) Give up on OSX. IT won't work properly, I tried. Well, you can try too, but I found another way... 2) Load linux on your mac. Rock on! 3) Download 'SAM-BA_CDC.zip (Linux - v1.13 current release) (7 MB, revision 1.13, updated 6/09)' from http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3883 4) Unzip that package somewhere helpful. Connect your USB -> Serial connector , and connect your serial to the board. 5) run lsusb, and look for 'Bus 004 Device 007: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port' 5) if that exists, go into the SAM-BA directory, and run ./sam-ba. You should be able to select /dev/ttyUSB0 and connect to it.