Burning Zombie Dummy

From Hive76 Wiki
Revision as of 02:00, 1 December 2010 by Capn midnight (talk | contribs) (Design)
Jump to: navigation, search
Imma eat yer braaaaains
Sean was asked by an independent film group to develop a "burning zombie" special effect for the next arc of their series Exile. Originally, they planned on setting one of the actors on fire. When no one volunteered for the task, they planned on strapping a bust to one of the actors and setting the bust on fire. This was deemed appropriate, until they asked Sean to do it, when he politely suggested that it would be better (for values of "better" equating to "infinitely safer") to build a dummy with articulating arms and some sort of "walking" motion.

[Unofficial Video] Sean started with a simple sketch to feel out the details of what needed to be in the apparatus. PJ and his friend Bob helped with figuring out the technical details and labor of construction. The project came in three parts, the Cart, the Torso, and the Head.

Design

The design for the dummy started out on paper. A few features were know right from the beginning.

  • Off-center wheels would make the cart wobble.
  • A handle on the back of the cart would make it easy to push while hiding behind the dummy out of camera view.
  • A spar would hold the torso upright.
  • The spar would be folding to allow for easy transport.
  • The torso would not be permanently fixed to the cart, for easier transport and for potential reuse of the cart.
  • Cables would control the arms.
  • The skull for the head would be based around a squash or melon.
Leonardo Da Zombie

Cart

The cart provided a handle for moving the dummy from a safe distance, a spar for holding the torso in the air, and off-center wheels for inducing a wobble motion that would make the dummy appear to move with a loping, shambling hobble. Dummy Cart.jpg

Torso

The torso was a basic form for holding shape in the shirt covering it, as well as a platform for attaching arms that would swing during movement and a spike for attaching a head. First, formed the spine and shoulders Dummy (1).jpg Then, the hips Dummy (2).jpg A piece of cardboard was nailed to the spine to begin the rib cage Dummy (3).jpg And wrapped the cardboard around for the basic form Dummy (4).jpg Simple hinges made the elbows of the arms Dummy (6).jpg And the shoulders were mostly just straps made from duct tape (also, this mask form would later be used to make the face) Dummy (7).jpg With clothes on, it's already pretty convincing Dummy (8).jpg A cable through and around eyelet screws controlled the arms Dummy (10).jpg

Head

And the face was formed with modelling clay around a craft mask blank. The major facial features are first shaped with rolls of clay, then rolled-out sheets of clay are overlapped and blended to make "skin". Finally, strips of tissue paper are cemented on top of the clay to give it strength as it dries out and to give the skin a dried, dead look. Dummy (14).jpg

Final Dummy

And here is the completed dummy Dummy Complete.jpg